Research on coating technology with wet-process sprayed mortar: waste and productivity

Denise Ribeiro; Gabriela Alves Tenório de Morais; Alberto Casado Lordsleem Júnior

doi:10.1590/0104-530x4594-20

Original Article

Research on coating technology with wet-process sprayed mortar: waste and productivity

Denise Ribeiro; Gabriela Alves Tenório de Morais; Alberto Casado Lordsleem Júnior

http://dx.doi.org/10.1590/0104-530x4594-20 Gest. Prod., vol.27, n3, 4594, 2020

SciELO

Downloads: 0

Abstract

Abstract The mechanical application of mortar is as an adequate solution to minimize the problems in the execution of internal and external coating of the buildings. However, few scientific studies address the gains in efficiency afforded by mechanization as well as the scarce parameters of waste, productivity and quality that could contribute to choosing this technology. This article aims to characterize the presented constructive technology and to investigate the waste of mortar (percentage of losses and consumption) and the productivity of the labor in the execution of internal and external coating for sealing in the application of wet-process sprayed mortar. Investigations were carried out in 08 construction works, which presented results of up to 150% and 0.18h/m2 for, respectively, loss of industrialized mortar and labor productivity. Thus, the present research contributes to the advancement of the knowledge about the wet-process sprayed mortar by increasing the understanding of the technology. Other important contributions are the indicators of losses and productivity and their detailed measurement, which are efficient tools to assist the companies in the decision-making by adopting this technology as well as in the management of the activities during the execution process.

Keywords

Wet-process sprayed mortar, Loss of industrialized mortar, Labor productivity, Good business practices, Production management

References

Asano N. E. Tecnologia construtiva de revestimento externo de argamassa com projeção contínua. 2016.

Asano N. E., Barros M. M. S. B. Mortar external coating with continuous projection.. 2017.

Austin S. A., Robins P. J., Goodier C. I. The performance of hardened wet-process sprayed mortars. Journal of Concrete Research. 2000;52(3):195-208.

Austin S. A., Robins P. J., Goodier C. I. Construction and repair with wet-process sprayed concrete and mortar. Shotcrete Journal. 2002;14(1):10-2.

Bello A. C. D., Cechin G., Masuero A. B., Stolz C., Santos No. R., Zucchetti L. Comparative study of the adhesion strength to the traction of mortar coatings applied manually and with continuous mechanical projection.. 2017.

Notebook of assets of the construction community of Belo Horizonte. 2012.

Rationalized coating. 2012.

Cichinelli G. C. Acabamento projetado: conheça os principais cuidados para usá-la corretamente e alguns produtos disponíveis. Revista Téchne. 2010;158:40-51.

Corrêa A. Comparação de execução de revestimentos argamassados utilizando máquina de projeção e o método manual. 2010.

Costa D. B. Implementação de indicadores de produtividade e perdas para processos construtivos à base de cimento em Salvador. 2013.

Crescencio R. M., Parsekian G. A., Barros M. M. S. B., Sabbatini F. H. Execution of coatings with wet-process sprayed mortar.. 2000.

Fernandes H. C., John V. M. Desenvolvimento de metodologia para estimativa da energia de lançamento das argamassas projetadas por spray a ar comprimido. 2007.

Giribola M. Mortar projector pump: leasing should provide wear parts for immediate replacement and preparation of construction logistics with larger teams for finishing. Construção Mercado Journal. 2013;141.

Inouye K. P. Workforce productivity in wet-process sprayed mortar coating.. 2014.

Lordsleem Jr. A. C., Póvoas Y., Carvalho J. Coating in wet-process sprayed mortar: case study in the city of Recife-PE.. 2014.

Nakakura E. H. Case study: facade coating - royal light building. 2005.

Paravisi S. Avaliação de sistemas de produção de revestimentos de fachada com aplicação mecânica e manual de argamassa. 2008.

Tables of composition of prices for budgets. 2012.

Pinilla Melo J., Flores Medina N., Sepulcre Aguilar A., Hernández Olivares F. Rheological and thermal properties of aerated sprayed mortar. Construction & Building Materials. 2017;154:275-83.

Ruffeil L. C., Silva A. A., Grisolia B. B., Fonseca K. R., Rodrigues P. M., Bordalo C. S., Paes I. N. Analysis of the mechanical and performance characteristics of wet-process sprayed mortar. 2017.

Souza U. E. L. How to reduce losses in construction sites - management manual on consumption of civil construction materials.. 2005.

Souza U. E. L. How to increase labor efficiency - construction productivity management manual.. 2006.

Tamaki L. Performance adhered. Téchne Journal. 2012;185:24-31.

Pumping technology for construction. 2016.

Zanelatto K. C. Avaliação da influência da técnica de execução no comportamento dos revestimentos de argamassa aplicados com projeção mecânica contínua. 2012.

Zanelatto K. C., Barros M. M. S. B., Monte R., Sabbatini F. H. Evaluation of the influence of the execution technique on the behavior of coatings with wet-process sprayed mortar. Ambiente Construído. 2013;13(2):87-109.

Research on coating technology with wet-process sprayed mortar: waste and productivity

Denise Ribeiro; Gabriela Alves Tenório de Morais; Alberto Casado Lordsleem Júnior

Abstract

Keywords

References

Links

Share

Gest. Prod.